No Access Submitted: 27 April 2000 Accepted: 22 August 2000 Published Online: 10 October 2000
Appl. Phys. Lett. 77, 2491 (2000); https://doi.org/10.1063/1.1318723
more...View Affiliations
  • Department of Physics, Astronomy, and Materials Science, Southwest Missouri State University, 901 S. National Avenue, Springfield, Missouri 65804
View Contributors
  • Z. P. Guan
  • A. L. Cai
  • J. S. Cabalu
  • H. L. Porter
  • S. Huang
We report the results of successful growth of GaN on the C-terminated surface of SiC. A combination of direct heating and hydrogen plasma treatment was employed for surface preparation. High-quality epitaxy was achieved in epilayers as thin as 2000 Å, as evidenced by the x-ray diffraction full width at half maximum of 90 arc sec and 4.2 K donor-bound exciton peak width of 1.4 meV. The epilayers exhibit clear signatures of compressive strain, suggesting a more favorable growth mode than can be achieved on the Si-terminated surface.
  1. 1. For a comprehensive review, Mater. Res. Soc. Symp. Proc. 395, 1 (1996). Google Scholar
  2. 2. S. Nakamura, M. Senoh, S. Nagahama, N. Iwasa, T. Matsushita, and T. Mukai, Appl. Phys. Lett. 76, 22 (2000). Google ScholarScitation, ISI
  3. 3. W. Y. Ho, W. K. Fong, C. Surya, K. Y. Tong, W. Kim, A. Botcharev, and H. Morkoç, MRS Internet J. Nitride Semicond. Res. 4S1, G6.5 (1999). Google Scholar
  4. 4. R. F. Davis, T. W. Weeks, Jr., M. D. Bremser, S. Tanaka, R. S. Kern, Z. Sitar, K. S. Ailey, W. G. Perry, and C. Wang, Mater. Res. Soc. Symp. Proc. 395, 3 (1996). Google ScholarCrossref
  5. 5. A. J. Ptak, M. R. Millecchia, T. H. Myers, K. S. Ziemer, and C. D. Stinespring, Appl. Phys. Lett. 74, 3836 (1999). Google ScholarScitation, ISI
  6. 6. T. Zywietz, J. Neugebauer, and M. Scheffler, Appl. Phys. Lett. 73, 487 (1998). Google ScholarScitation, ISI
  7. 7. J. Neugebauer, T. Zywietz, and M. Scheffler, Phys. Rev. Lett. 80, 3097 (1998). Google ScholarCrossref, ISI
  8. 8. A. R. Smith, R. M. Feenstra, D. W. Greve, M.-S. Shin, M. Skowronski, J. Neugebauer, and J. E. Northrup, Appl. Phys. Lett. 72, 2114 (1998). Google ScholarScitation, ISI
  9. 9. F. Boscherini, R. Lantier, A. Rizzi, F. D’Acapito, and S. Mobilio, Appl. Phys. Lett. 74, 3308 (1999). Google ScholarScitation, ISI
  10. 10. A. D. Bykhovski, B. L. Gelmont, and M. S. Shur, J. Appl. Phys. 81, 6332 (1997). Google ScholarScitation, ISI
  11. 11. T. Sasakiand T. Matsuoka, J. Appl. Phys. 64, 4531 (1988). Google ScholarScitation, ISI
  12. 12. S. Y. Renand J. D. Dow, J. Electron. Mater. 26, 341 (1997). Google ScholarCrossref, ISI
  13. 13. M. A. L. Johnson, S. Fujita, W. H. Rowland, Jr., K. A. Bowers, W. C. Hughes, Y. W. He, N. A. El-Masry, J. W. Cook, Jr., and J. F. Schetzina, J. Vac. Sci. Technol. B 14, 2349 (1996). Google ScholarCrossref, ISI
  14. 14. C. F. Lin, H. C. Cheng, G. C. Chi, M. S. Feng, J. D. Guo, J. M. Hong, and C. Y. Chen, J. Appl. Phys. 82, 2378 (1997). Google ScholarScitation, ISI
  15. 15. O. Brandt, R. Muralidharan, P. Waltereit, A. Thamm, H. von Kiedrowski, and K. H. Ploog, Appl. Phys. Lett. 75, 4019 (1999). Google ScholarScitation, ISI
  16. 16. V. G. Semicon North America (Beverly, Massachusetts, USA) confirmed that the original heater was designed to operate at a maximal temperature of 850 °C. Google Scholar
  17. 17. P. Waltereit, O. Brandt, A. Trampert, M. Ramsteiner, M Reiche, M. Qi, and K. H. Ploog, Appl. Phys. Lett. 74, 3660 (1999). Google ScholarScitation, ISI
  18. 18. N. V. Edwards, M. D. Bremser, R. F. Davis, A. D. Batchelor, S. D. Yoo, C. F. Karan, and D. E. Aspnes, Appl. Phys. Lett. 73, 2808 (1998). Google ScholarScitation, ISI
  19. 19. C. Kirchner, V. Schwegler, F. Eberhard, M. Kamp, K. J. Ebeling, K. Kornitzer, T. Ebner, K. Thonke, R. Sauer, P. Prystawko, M. Leszczynski, I. Grzegory, and S. Porowski, Appl. Phys. Lett. 75, 1098 (1999). Google ScholarScitation, ISI
  1. © 2000 American Institute of Physics.